Approval and test specification - Plugs and socket-outlets
Sets the plug and socket design used in Australia. Mains powered medical electrical equipment is connected with a plug that has partially insulated active and neutral pins and the Australian pin layout.
The text of this standard is sold by Standards Australia and Standards NZ and is not reproduced here. This page gives the code, edition, scope and what each market says about it.
Whether the market recognizes, harmonizes or adopts this standard, and which edition it accepts
| Market | Status | Edition accepted | National code | Details |
|---|---|---|---|---|
| Australia | Referenced | - | - | The TGA guidance says mains powered equipment is connected with a plug built to this standard. |
Open the market page and its pathway pages for the full requirement, protocol and report content
Related standards: GB 9706.1-2020, IEC 60601-1, JIS T 0601-1, IEC 60601-2-83, IEC 60601-1-8, IEC 60601-1-11, ISO 14708-1, AS/NZS 3820, AS/NZS 4417.1, IEC 62133-2. See .
Not legal or regulatory advice. Check the current official rules before you act. Parts of the approvals data are official open data reused under open licences. Data sources.